Corner and Full wall PVC Slatwall Install
1
Parts and Tools Required.
6 x PVC Slatwall Panels
Self Tapping
(for additional build)
1 x Drill Bit
1 x Cordless
Power Drill
Corner Trims
Starting from the middle four studs, install
5
a screw into each one leaving the two ends
of the PVC slatwall panel unscrewed.
NOTE: It is optional to pre-drill holes for
reference of hole locations. You may use a laser
level or Regular level to make sure the panels
are installed straight.
20
H-Shape Trims
Screws
End Trims
Self Tapping Screw
TOP VIEW
Start with the corner of the wall, align bottom
4
PVC Slatwall panel.
Recommended
Height from the oor:
14 inches
Screw the remaining screws in the middle
four studs as shown below (3 screws per
6
stud).NOTE: Do not screw the ends of the
PVC slatwall yet.
Stud
Screwing
not required
here
Stud