NewAge Products 40sqft PVC slatwall - Silver Guide D'installation page 23

Corner and Full wall PVC Slatwall Install
Using cordless power drill, first secure
14
the PVC Slatwall panel onto middle four
studs. Make sure to install 3 screws per
stud.
PVC Slatwall
Panel
TIP: Continue installing the PVC Slatwall kits untill you reach opposite corner of the wall at installation
area, I.e, Kit 4. Before installing the final 40 sqft PVC Slatwall kit, follow the instructions provided on
next page.
KIT 1
23
Stud
Self Tapping
Screw
TOP VIEW
KIT 2
Screw the remaining screws in the middle
four studs as shown below (3 screws per
15
stud). NOTE: Do not screw the ends of the
PVC slatwall yet.
Stud
KIT 3
(Cont.)
Screwing
not required
here
KIT 4