Hanging Cabinets On Slatwall - NewAge Products BOLD 3.0 Serie Mode D'emploi

Hanging Cabinets on Slatwall

Note: Slatwall Brackets for use with standard 3" slatwall Sold Separately. Check with your
slatwall supplier to determine the rated capacity of your slatwall. DO NOT OVERLOAD.
NewAge Slatwall Brackets are only compatible with standard 3" on center Slatwall.
Parts Needed.
Slatwall Bracket
3 X Hex Bolt
(1/4" x 5/8")
3x Wall Washer
(1/4")
Attach braket to slatwall at desired
2
height. For Locker cabinet attach
second bracket 65" below rst bracket.
Using 1/4" drill socket or 1/4" wrench securely tighten lock
4
nuts to each wall bracket from inside cabinet .
LOCKER
3x Lock Nut
(1/4")
1
Insert bolts through slatwall bracket.
3 Align bolt with slots on back of cabinet
and hang cabinet.
WALL CABINET
BASE CABINETS
15