Connecting Corner Wall Mounted Shelf - NewAge Products Pro Serie Mode D'emploi

Connecting Corner Wall Mounted Shelf

Note:
If installing two 4ftx8ft and one 4ftx4ft Wall Mounted Shelves in an L configuration, follow
instructions starting on 1B of this page:
1
Begin installing the 4ftx4ft Wall Mounted Shelf by following the
instructions below.
If you are only installing Wall Mounted Shelves in one direction,
A
follow the instructions on page 27 - "Connecting Wall Mounted
Shelves Horizontally",
Once the location of the Wall Mounted Shelf has been decided,
B
install the Wall Mounting Bracket of the 4ftx4ft Wall Mounted
Shelf a 1/4" off the wall following the instructions on page 13 -
"Installing Wall Brackets and Back Beam."
Continue with the assembly following instructions on page 27 -
2
"Connecting Wall Mounted Shelves Horizontally."
Align the side of the Wall Mounting
3
Bracket of the next 2ftx8ft Wall Mounted
Shelf with the Front Perimeter Beam of the
4ftx4ft Wall Mounted Shelf. Mark, drill a
pilot hole and install accordingly.
1/4"
29