Tools And Parts; Installation Requirements; Options - Maytag MHWZ600WR00 Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Tools and Parts

Gather the required tools and parts before starting installation. The parts supplied are in the
washer drum.
Tools needed for connecting the water inlet hoses
Pliers (that open to 1
/
" [39.5 mm])
9
16
Tools needed for installation
Open end wrenches
14 mm and 13 mm
Level
Parts supplied
A
B
E
Alternate Parts
Your installation may require additional parts. If you are interested in purchasing one of the
items listed here, call the toll-free number on the cover or in the "Assistance or Service"
section.
If You Have
You Will Need to Buy
Laundry tub or standpipe
Sump pump system (if not already available)
taller than 96" (2.4 m)
Overhead sewer
Standard 20 gal. (76 L), 30" (762 mm) tall drain tub or
utility sink and sump pump (available from local plumbing
suppliers)
Floor drain
Siphon break, Part Number 285834; additional drain hose,
Part Number 8318155; and connector kit, Part
Number 285835
Drain hose too short
4 ft (1.2 m) drain hose extension kit, Part Number 285863

INSTALLATION REQUIREMENTS

Flashlight (optional)
Wood block
Ruler or measuring tape
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
E. Beaded tie strap
D
C
If You Have
You Will Need to Buy
Water faucets beyond reach
2 longer water fill hoses:
of fill hoses
6 ft (1.8 m) Part Number 76314
10 ft (3.0 m) Part Number 350008
Pedestal
You have the option of purchasing pedestals of different heights separately for this washer. You
may select a 10" (254 mm) or a 15.5" (394 mm) pedestal. The pedestal will add to the total
height of the washer.
Optional pedestal
Pedestal Height
Approximate height
with washer
10" (254 mm)
46" (1168 mm)
10" (254 mm)
46" (1168 mm)
10" (254 mm)
46" (1168 mm)
15.5" (394 mm)
51.5" (1308 mm)
15.5" (394 mm)
51.5" (1308 mm)
15.5" (394 mm)
51.5" (1308 mm)
Stack Kit
Are you planning to stack your washer and dryer? To do so, you will need to purchase a
Stack Kit.
To order, call the dealer from whom you purchased your washer or refer to the "Assistance or
Service" section. Ask for Part Number 8572546.

Options

Color
Model Number
White
MHP1000SQ0
Black
MHP1000SB0
Cranberry
XHP1000WR
White
MHP1500SQ0
Black
MHP1500SB0
Blue
MHP1500SK0
5

Publicité

Table des Matières
loading

Table des Matières