Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
installation requirements
TOOLS AND PARTS
Gather required tools and parts before starting installation.
Tools needed:
Flat-blade screwdriver
Adjustable or open-end
wrench 9/16" (14 mm)
4" min
(102 mm)
Wood block
Pliers that open to 1
9
⁄
"
16
(39.5 mm)
1/4" nut driver
(recommended)
Caulking gun and compound
(new vent installations)
4
#2 Phillips screwdriver
Level
Ruler or measuring tape
Adjustable wrench that
opens to 1" (25 mm) or
hex-head socket wrench
Wire stripper
Utility knife
Tin snips (new vent
installations)
Tools needed for gas installations:
8" or 10" pipe wrench
Pipe-joint compound
resistant to LP gas
Optional tools:
Flashlight
Parts supplied:
NOTE: Remove parts package from the washer basket.
Check that all parts were included.
Front leveling feet with nuts (2) Shipping strap (Not in parts bag.
Drain hose
8" or 10" adjustable wrench
(for gas connections)
Bucket
See "Remove Shipping Strap.")
Silver double-wire hose clamp
Publicité
Table des Matières
