EN
1. First, fully charge the gamepad. To connect the gamepad to
your Nintendo Switch* for the first time, power on your console
and from the HOME Menu select Controllers and then Change
Grip/Order. Press and hold the H button for 5 seconds until the
4 status LEDs flash rapidly. Following that, press the left and
right shoulder buttons simultaneously. The gamepad will be
displayed and you can now use it. The LED that lights up on
the gamepad indicates which slot (1 – 4) it is assigned to.
2. The gamepad will switch off automatically if you don't use it for
an extended period. You can switch it off manually by powering
off the console.
3. The next time you want to connect to your Switch, power on
the console and press the H button. The 4 status LEDs will flash
slowly until the connection is established.
4. The gamepad has a turbo function. To activate it, press both
the T button and the button you want to assign this function
to. Each time you now press and hold this button, it will keep
looping through its action until you release it.
5. With the O button you can take a picture (press once)
or make a video (hold pressed).
6. You can reset the gamepad pressing the little recessed
button on the back with a thin peaked object.