General Safety Rules; Work Area Safety; Electrical Safety; Personal Safety - Makita 6904VH Manuel D'instruction

ENGLISH
SPECIFICATIONS
Capacities
No load speed (RPM)
Impacts per minute
Max. fastening torque
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.

GENERAL SAFETY RULES

WARNING:
Read all instructions. Failure to follow all
instructions listed below may result in elec-
tric shock, fire and/or serious injury. The
term "power tool" in all of the warnings listed
below refers to
(corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS

Work area safety

1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Model
Standard bolt
High tensile bolt
Wood screw
Self-drilling screw
Square drive
High
Low
High
Low
High
Low
Overall length
Net weight
GEA001-3
your mains-operated
6904VH
M10 - M16 (3/8" - 5/8")
M10 - M12 (3/8" - 1/2")
6 mm x 100 mm (1/4" x 3-15/16")
6 mm (1/4")
12.7 mm (1/2")
0 - 2,400/min.
0 - 2,100/min.
0 - 3,000
0 - 2,500
196 N.m (145 ft.lbs)
147 N.m (109 ft.lbs)
265 mm (10-3/8")
1.8 kg (4.0 lbs)

Electrical safety

4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.

Personal safety

9. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
2
6905H
M12 - M20 (1/2" - 3/4")
M12 - M16 (1/2" - 5/8")
-
-
12.7 mm (1/2")
2,200/min.
2,600
294 N.m (217 ft.lbs)
275 mm (10-13/16")
2.3 kg (5 lbs)