Pulsar MERGER LRF XP50 Guide De Démarrage Rapide page 11

Device is on: Microbolometer calibration: short press
of the ON/OFF button
(5) REC button
Device is in Start/pause/resume video recording:
Video mode: short press of the REC button (5).
Stop video recording: long press of the
REC button (5).
Switch to Photo mode: long press of the
REC button (5).
Device is in Capture a photo: short press of the REC
Photo mode: button (5).
Switch to Video mode: long press of the
REC button (5).
(6) LRF button
Device is on: Turn on the rangefinder/measuring
distance: short press of the LRF button (6).
Activate SCAN mode: long press of the LRF
button (6).
SCAN mode: Deactivate SCAN mode: short press of the
LRF button (6).
Turn off the rangefinder: long press of the
LRF button (6).
(7) UP button
Device is on: Switching amplification levels: short press
of the UP button (7).
Device is on: Turn on/off the White Hot palette: long
(4).
In Quick
Menu:
In Main
Menu:
(8)
Device is on: Control discrete digital zoom: short press
In Quick
Menu:
In Main
Menu:
(9)
Device is on: Enter Quick Menu: short press of the
In Quick
Menu:
press of the UP button (7).
Increase value: short press of the UP
button (7).
Menu navigation up/right: short press of
the UP button (7).
DOWN/ZOOM button
of the DOWN/ZOOM button (8).
PiP on/off: long press of the DOWN/ZOOM
button (8).
Decrease value: short press of the DOWN/
ZOOM button (8).
Menu navigation down/left: short press of
the DOWN/ZOOM button (8).
MENU button
MENU button (9).
Enter Main Menu: long press of the MENU
button (9).
Navigation upwards: short press of the
MENU button (9).
Exit Quick Menu: long press of the MENU
button (9).
English 11