Controls And Jacks; Symbols And Annunciators - RS Pro RS-660 Manuel D'instructions

Compact Digital Multimeter / English
This symbol adjacent to one or more terminals identifies them as
being associated with ranges that may, in normal use, be subjected
to particularly hazardous voltages. For maximum safety, the meter
and its test leads should not be handled when these terminals are
energized.

3. Controls and jacks

1. LCD Display
2. Data Hold Button
3. Function Switch
4. Backlight Button
5. 10 A Jack
6. COM Jack
7. Positive Jack
Note: Tilt stand, fuse and battery
compartment are on rear of unit.

4. Symbols and Annunciators

Continuity
Diode test
μ
μ Micro(amps)
M M Milli(volts, amps)
K K Kilo(ohms)
Ω
Ω O hms
VDC VDC Volts direct current
VAC VAC Volts alternating current
ADC
ADC Amps direct current
BAT BAT Battery test
2
All manuals and user guides at all-guides.com
5. Specifications
NOTE: Accuracy specifications consist of two elements:
NOTE: Accuracy is stated at 65° F to 83° F (18°C to 28°C) and less than 75% RH.
02/01/2018 Version No. 001 02/01/2018 Version No. 001
Function Range Resolution
200 mV 0.1 mV
2000 mV 1m V
DC Voltage
20 V 0.01 V
(V DC)
200 V 0.1 V
600 V 1 V
200 V 0.1 V
AC Voltage
(V AC)
600 V 1 V
200 μA 0.1 μA
20 mA 10 μA
DC Current
(A DC)
200 mA 100 μA
10 A 10 mA
200 Ω 0.1 Ω
2 kΩ 1Ω
Resistance 20 kΩ 0.01 kΩ
200 kΩ 0.1 kΩ
2 MΩ 1kΩ
9 V 10 mV
Battery Test
1.5 V 10 mV
• (% reading) – This is the accuracy of the measurement circuit.
• (+ digits) – This is the accuracy of the analog to digital converter.
Compact Digital Multimeter / English
Accuracy
±(0.5%reading + 3digits)
±(0.8%reading + 3digits)
±(1.2%reading + 10digits 50/60 Hz)
±(1.0%reading + 5digits)
±(1.2%reading + 5digits)
±(3.0%reading + 5digits)
±(1.0%reading + 5digits)
±(1.5%reading + 5digits)
±(1.0%reading + 2digits)
3