Setup And Operation - auna Sound Maitre Mode D'emploi

All manuals and user guides at all-guides.com

SETUP AND OPERATION

Setup network
WPS button
• Configuration > Network > Wi-Fi Network > Add/Remove AP > Add AP
(WPS button) , press and hold OK to select. Invoke the WPS function of
the target Wi-Fi router (see the user manual of the target Wi-Fi router).
• The radio and the Wi-Fi router will exchange security information to
complete the association process. If the configuration is not done within
one minute, the radio will exit the process and the user is required to
repeat the process again. Always place the radio within 2 meters of the
Wi-fi router to ensure smooth and fast association.
Wi-Fi password entry
• When the radio is used the first time (or moved to a new premise), after
the "Boot up and connect to www.skytune.net" message, a prompt to
configure network will pop up. Choose [Yes] by turning the rotary knob
and press Select. Select [Add/Remove AP], then [Add AP (Scan)] to
scan the air for available Wi-Fi AP. A list of APs with reasonable signal
strength will be shown.
• Choose the target Wi-Fi AP and enter the password (if any).
• To enter the password: Dial to choose the character for the first charater
position, press OK to enter and move to the next chracter position and
dial to choose thenext character and press OK again.Repeat until the
last character has been entered and then long press OK to confirm the
passwrod entry..
• If the password entry is correct, the radio will show "Associating" and
then "Associatiton complete". The radio will automatically connect to
the AP just associated. The radio will then obtain the necessary network
parameter for Interent connection (with DHCP).
EN
21