Commissioning And Operation - auna Verticalo SE DAB Mode D'emploi

1 Cartridge and Stylus
2 Turntable
3 Tone Arm
4 Speakers
5 Cue Level
6 PLAY/PAUSE Button
7 PAIR/SCAN Button
8 ALARM Button
9 SLEEP Button
10 STANDBY Button
11 TUNE Knob
12 VOLUME Knob

COMMISSIONING AND OPERATION

Before start-up
• Carefully remove the device from its packaging and completely remove
the packaging material.
• Unwind the power cord completely.
• Place the product on a stable, flat surface near a wall outlet and away
from strong magnetic fields.
Start-up
• Connect the mains plug of the device to the socket.
• Remove the white plastic cover from the turntable pin by pulling it in
the direction of the arrow.
• When using the unit, be careful not to damage the turntable pin.
• This product is designed to work with an AC adapter (12 V 1 A). Using this
product with any other AC adapter may cause damage.
NOTE: The device is equipped with a standard mains plug. If this power plug
does not fit into your outlet, do not attempt to file it. If this plug does not
fit into your outlet, your outlet is probably obsolete and not polarized. You
should have your outlet replaced by a qualified electrician.
13 USB socket
14 Magnetic Adapter
15 LCD Screen
16 MENU/INFO Button
17 ENTER/SNOOZE Button
18 PRESET Button
19 MODE Button
20 Speed Control Knob
21 AUX IN Jack
22 EARPHONE Jack
23 Power Jack
24 Power Switch
EN
21