Pro Chimney hood telescoping
duct cover extension
Compatible hood models
Telescoping extensions accommodate 10 ft. (3 m) ceilings.
Model
HPCN36WS
HPCN36WS
HPCN48WS
HPCN48WS
Securing the Pro Chimney hood telescoping extension
1. To prevent scratches, lay paper over the edges of the
lower flue duct to protect the surface.
All manuals and user guides at all-guides.com
Telescoping extension
CHMHP36TW
CHMHP36XTW
CHMHP48TW
CHMHP48XTW
2. Ensure that the minimum height of 30'' (762 mm) from
the bottom of the hood to the cooking surface will be
maintained (see the hood's installation instructions).
1¼" (32)
1¼" (32)
1¼" (32)
14"
14"
14"
(356)
(356)
(356)
18" – 35"
18" – 35"
18" – 35"
( 457 – 889)
( 457 – 889)
( 457 – 889)
3. Locate two studs at the mounting location. At the wall
stud locations, measure 1¼'' (32 mm) down from the
ceiling to the middle of the bracket.
4. Mount the bracket at the wall stud locations using (2)
½'' (13 mm) screws (provided). Ensure that the bracket
is level.
17"
17"
(432)
(432)
18"
18"
(457)
(457)
18"
18"
18"
(457)
(457)
(457)
inches (mm)
inches (mm)
Page. 5