Hanging The Chimney Hood - Thermador PROFESSIONAL HPCN36NS Manuel D'installation

Masquer les pouces Voir aussi pour PROFESSIONAL HPCN36NS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Hanging the Chimney Hood

The transition supplied with the hood connects to standard
10-inch round duct. Installations require a cutout in the
ceiling to accommodate 10" (254 mm) duct and the ½"
(13 mm) conduit carrying power to the unit.
Chimney extensions, sold separately, are available to cover
the space between the top of the hood and ceiling (see
"Chimney Extension Installation (optional)" on page 16).
measurements in inches (mm)
7¾"
(197)
6½"
(165)
16" (406)
to top of wood
mounting strip
*Follow cooking
appliance
recommendations
1. Use a T-10 Torx head screwdriver to remove the screw
securing the junction box channel covering the wires.
Transition
Centerline
Optional
C L
C L C L
Chimney
Extension
18"
(457)
24" (610)
Hood Depth
*Hood height
*Hood height
*Hood height
min. 30" (762)
min. 30" (762)
min. 30" (762)
max. 36" (914) to
max. 36" (914) to
max. 36" (914) to
cooking surface
cooking surface
cooking surface
Figure 8: Transition Centerline
Junction Box
Channel
Figure 9: Junction Box Channel
2. Remove one circular knockout behind junction box
channel.
3. Using two people to lift, rest the hood on the wood
bracket. Make sure the wood bracket fits into the
recess on the back of the hood.
4. From inside the hood, predrill the holes labeled "J" in
Figure 10 in hood into the wood bracket with a 5/8"
(16 mm) drill bit. Secure the hood to the wood bracket
with five (5) 1½" (38 mm) screws.
Figure 10: Location of Screw Holes
5. Connect additional ducting.
J
English 11

Publicité

Table des Matières
loading

Table des Matières