emerio MK-107297 Mode D'emploi page 27

Frothing milk:

Place/slide the round (whisk) attachment for frothing milk into the holder on the shaft (the round
whisk). See illustrations 1 and 2.

Fill the jug with milk (take note of the maximum filling level 150 ml). For best results, use cold, full fat,
long life milk.

Fit the lid onto the jug.

Switch on the appliance. The indicator lamp in the switch will be red.

After preparation, which takes 3 to 4 minutes, the appliance will switch itself off automatically.

Remove the lid and spoon the froth from the jug or pour the froth out with the hot milk.
Attention:

The edge of the jug will be hot.

Rinse the inside of the jug with water and dry it with a tea towel or kitchen paper before returning the
jug to the base.

The jug must never be replaced on the base without being cleaned.
Heating milk:

Remove the spring ring when heating milk, the rotating inner piece of the whisk and the holder will be
retained.

Fill the jug with milk (take note of the maximum filling level of 250 ml).

Fit the lid onto the jug.

Switch on the appliance. The indicator lamp in the switch will be red. The quiet buzzing noise is
normal.

After preparation, which takes 4 to 5 minutes, the appliance will switch itself off automatically.

Remove the lid and pour out the hot milk.
Attention:

The edge of the jug will be hot.

Rinse the inside of the jug with water and dry it with a tea towel or kitchen paper before returning the
jug to the base.

The jug must never be replaced on the base without being cleaned.
MAINTENANCE AND CLEANING

Always disconnect the appliance from the power outlet before cleaning.

Wipe the appearance of body with a mild and damp cloth or cleaner, never use a poisonous cleaner.

Clean the lid, the whisk and the jug with warm soapy water and a soft cloth. Rinse them in clean water
and dry well.

Do not immerse the appliance, the cord or its base in water or any other liquids. Do not wash any parts
in a dishwasher.
TECHNICAL SPECIFICATIONS
Power supply: 220V-240V ~ 50Hz/60Hz
Power drain: 300W-350W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has
occurred during production or transportation, please return the device to your dealer. In addition to
statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee:
All manuals and user guides at all-guides.com