Recording From External Equipment You Are Watching; Copying From A Camcorder - Samsung DVD-R128 Mode D'emploi

Recording from external
equipment you are
watching
Before you start
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1 Press the OPEN/CLOSE button, place a
recordable disc on the disc tray.
Press the OPEN/CLOSE button to close
2
the disc tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 40)
3 Press the INPUT SEL. button to select the
input source according to the connection
you made.
The front panel display changes in the following
sequence: (DV input is display only DVD-R130, R131)
➞ ➞
PR Number AV1
If you connect a digital camcorder, press the
INPUT SEL. button to select DV.
(See pages 43-44)
4 Press the REC MODE button repeatedly,
(or press the REC MODE button, then
press the ...† button) to select the
recording speed(quality).
➞ ➞ ➞ ➞
SP LP EP XP
Record Mode SP (02:12)
➞ ➞ ➞
AV2 AV3 DV
Press the REC button.
5
To pause recording
Press the PLAY/PAUSE( ) button to pause a
recording in progress.
Press the PLAY/PAUSE(
●
recording.
You can switch channels by pressing the
●
( / )
buttons while recording pauses.
To stop recording
Press the STOP button to stop or finish a recording in
progress.
When using DVD-RW/DVD-R discs, the message
●
'Updating the disc information.
Please wait for a moment.' is displayed.
You can not change the recording mode
■
while recording or Pause.
NOTE
Recording will stop automatically if
■
there is no free space left for recording.
Up to 99 titles can be recorded onto a
■
disc.
Recording will stop automatically if a
■
copy protected image is selected.
DVD-RW discs must be
■
formatted before starting to record.
Most new discs are sold unformatted.
Do not use DVD-R authoring discs with
■
this DVD Recorder.
Copying from a
Camcorder (DVD-R130,
R131 only)
You may control the Camcorder using the IEEE1394
(DV) interface.
Before you start
Check that the disc has enough available space for
the recording. Adjust the recording mode.
1 Press the OPEN/CLOSE button, place a
recordable disc on the disc tray.
) button again to resume
PROG
43
English -