Recording From External Equipment - Samsung DVD-R130 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour DVD-R130:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Recording from External
Equipment
Before you start
Check that the disc has enough available space for the
recording. Adjust the record mode.
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RW disc is inserted, the message
"Uninitialized Disc Do you want to initialize this disc?" will
appear (See page 44)
3
Press the INPUT SEL. button to select the input
source according to the connection you made.
The front panel display changes in the following
sequence:
© Channel Number © AV1 © AV2 © DV
If you've connected a digital camcorder, press the
INPUT SEL. button to select DV. (See page 48)
4
Press the REC MODE button repeatedly, (or press
the REC MODE button and then press the ... ... † †
button) to select the recording speed(quality).
© SP © LP © EP © XP
Record Mode
XP (01:11)
5
Press the REC button.
To stop recording
Press the STOP (
) button to stop or finish
recording in progress.
• When using DVD-RW/DVD-R discs, the message
'Updating the information of disc. Please wait for a
moment.' is displayed.
You can not change the record mode and
s
input source during recording.
NOTE
Recording will stop automatically if there is
s
no free space left for recording.
Up to 99 titles can be recorded onto a
s
disc.
Recording will stop automatically if a copy
s
protected image is selected.
DVD-RW discs must be formatted before
s
starting to record. Most new discs are sold
unformatted.
Do not use DVD-R authoring discs with
s
this unit.
English - 47

Publicité

Chapitres

Table des Matières
loading

Table des Matières