Thrustmaster TCA QUADRANT ADD-ON AIRBUS EDITION Mode D'emploi page 12

TROUBLESHOOTING AND WARNING
Visit https://support.thrustmaster.com to download the package containing the
drivers allowing you to update the product's firmware, providing you with more detailed
control of the product's features.
• My TCA Quadrant Add-On Airbus Edition modules aren't working properly, or seem
to be improperly calibrated, when connected to the TCA Quadrant Airbus Edition.
- Visit https://support.thrustmaster.com to check whether a more rec ent f irmware
version is available: if so, follow the instructions to download and install it.
- Power off your PC, and disconnect the USB connector for the TCA Quadrant Airbus
Edition throttle quadrant. Make sure that both SATA cables are properly connected t o
the devices.
- Power off your PC, and disconnect the USB connector for the TCA Quadrant Airbus
Edition throttle quadrant. Then reconnect the USB connector, power on your PC
again, and restart your game.
- When connecting the USB connector for the TCA Quadrant Airbus Edition t hrottle
quadrant, always leave the rudder axi s centered if you are using t he T FRP rudder
system (sold separately): never put your feet on the TFRP rudder s y stem 's pedals
when doing so.
• I can't configure my TCA Quadrant Add-On Airbus Edition modules with my TC A
Quadrant Airbus Edition throttle quadrant.
- In your game's Options / Controller / Gamepad or Joystick menu, select the
appropriate configuration or completely reconfigure the controller' s options.
- Visit https://support.thrustmaster.com to check whether a more rec ent f irmware
version is available: if so, follow the instructions to download and install it.
- For more informati o n, please refer to your game's user manual or online help.
- You can also use the T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphic al
EdiTor) advanced programming software.
• My TCA Quadrant Add-On Airbus Edition modules are too sensitive, or not
sensitive enough.
- The axes for the TCA Quadrant Add-On Airbus Edition modules automatically
calibrate themselves after a few movements, and after having reached the phy sical
stops for the axes.
- In your game's Options / Controll e r / Gamepad or Joystick menu, adjust the sensitivi t y
and dead zones for your controller (if these options are available).
- You can also use the T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphic al
EdiTor) advanced programming software.
These devices are intended for use with respect to gaming entertainment purposes
only. It is strictly forbidden to use these devices for professional training activities.
11/14