Discontinuing A Measurement; Memory - Storage And Recall Of The Measurements - Marque Verte BP 3BQ1-3 Mode D'emploi

5.5. Discontinuing a measurement

Size: 17mm * 60mm
If it is necessary to interrupt a blood pressure
measurement for any reason (e.g. the patient feels
unwell), the button can be pressed at any time.
The device then immediately lowers the cuff-pressure
automatically.
5.6. Memory – storage and recall of the measurements
The blood-pressure monitor automatically stores each of
the last 60 measurement values. By pressing the
«Memory» button, you come into direct average memory
reading, then the last measurement (MR60) as well as
the further last 59 measurements (MR2, MR3, ..., MR60)
can be displayed one after the other.
M 60
1
M 59
2
(M60: Values of the last measurement) (M59-M1: Values of the measurement before MR1)
☞ Further information
Measurements should not occur soon after each other, since otherwise, the results will be
falsified. Wait therefore for several minutes in a relaxed position, sitting or lying, before you
repeat a measurement.
38