Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONNECT GAS SUPPLY
A 58 inch (147.32 cm) corrugated gas line is connected to the manifold of the grill.
A) The main corrugated line passes through the "island" structure cavity to the bulk head
and regulator connection inside the tank enclosure (1).
B) Uncap the flare fitting from the T-Connection on the bulk head and regulator
connection (2).
C)
Connect the main corrugated hose to the T-Connection on bulkhead fitting. Use the
(12.7 mm) inch flared gasket to ensure proper seal (3).
If you choose to use rigid pipe, semi-rigid tubing, and/or a connector other than the one
supplied, the connector must comply with the Standard for Connectors for Outdoor Gas
Appliances and Manufactured Homes, ANSI Z21.75*CSA 6.27, and be suitable for outside
installation.
The length of this connector must not exceed 58" (147cm) due to a pressure drop that will
occur affecting the performance of the grill.
28
GAS SUPPLY CONNECTION
◆
⁄
"
1
2
5
7
3
9
8
4
5
6
7
Connecting corrugated gas line to the regulator
8
9
10
CONNECTION CHART
4
4
1
1
6
2
9
10
8
Typical natural gas pipe routing
Side view
Gas line and regulator connected
Hard piped gas supply
Cap (optional side burner)
Regulator
10
Publicité
Table des Matières
