Table des Matières
Publicité
ConneCt Gas supplY
A 58" (147.32 cm) corrugated gas line is connected to the manifold of the grill.
A) The main corrugated line passes through the "Island Structure" cavity to the hose
and regulator connection inside the tank enclosure (1).
B) Uncap the flare fitting from the 90° Connection on the regulator hose located inside
the tank enclosure (2).
C) Connect the main corrugated hose to the 90° bulkhead fitting. Use the 1/2" (12.7
mm) flared gasket to ensure proper seal (3).
Note: 1/2" flared gaskets are included in the Summit® Built-In tank Enclosure Kit
included with your grill. Only use the 3/8" (9.53 mm) flared gasket if you are installing
the optional side burner.
◆
30
GaS SUPPLY coNNEcTIoN
4
5
6
7
8
9
10
11
coNNEcTIoN cHarT
1
6
3
7
10
2
8
11
5
Typical tank cabinet or tank enclosure location
Side view
Top of box
Back of box
Corrugated gas line to manifold
90° fitting
1/2" (13 mm) flared gasket
Cap (optional side burner)
4
9
Publicité
Table des Matières
