Operating Instructions - brennenstuhl SHL 11 S IP44 Mode D'emploi

094612 SHL 11 S_SHL 18 S 28.04.16 07:58 Seite 7

Operating Instructions

tube has cooled off before replacing it. Always
unplug the lamp from the power supply before
replacing the fluorescent tube. Fluorescent
lamps contain small amounts of mercury. If the
fluorescent lamp breaks we recommend leav-
ing the room and airing it out thoroughly for a
few minutes. Additional information about the
disposal and handling of damaged fluorescent
lamps can be found at www.brennenstuhl.com.
Replacing the Fluorescent Tube
1. Unplug from the wall socket
2. Remove rivets on the end cap
3. Remove end cap
4. Remove fluorescent tube using the cap
5. Remove cap and place on the new fluorescent tube
6. Insert new fluorescent tube
7. Replace end cap
8. Fasten rivets
SHL 11 S IP44 / SHL 18 S IP54
7