brennenstuhl SHL 11 S IP44 Mode D'emploi page 6

094612 SHL 11 S_SHL 18 S 28.04.16 07:58 Seite 6
Workshop Inspection Lamp
SHL 11 S IP44 and
SHL 18 S IP54
Safety Instructions
• Please read the user guide carefully before
using the inspection lamp and keep it in a safe
place.
• Inspect the lamp and the power supply cord for
damage before each use. Do not use the lamp
if you see any damage. The lamp must be
destroyed if the power supply cord is damaged.
Failure to heed this warning may result in
potentially fatal electric shock!
• Do not use the workshop lamp in explosion-
prone areas containing flammable liquids,
gases or dusts. Mortal danger!
• Keep children away from the inspection lamp.
Children are unable to recognize the dangers
associated with electricity.
• Unplug the inspection lamp from the power
supply before cleaning it. Clean the lamp regu-
larly with a dry, lint-free cloth. The cloth may
be dampened slightly to remove stubborn dirt,
if needed. Do not use solvents, corrosive
cleaners or the like.
• Replace a defective fluorescent tube immedia-
tely with a new one. Wait until the fluorescent
6