Operation; General; Menu Item Information; Startup - Ovention Matchbox M1313 Manuel D'installation

OPERATION

General

Use the following information and procedures to operate an
Ovention matchbox oven.
® ®
NOTE: Model 1313 ovens are designed for pan sizes up to a
standard 1/4-size sheet pan (9"W x 13"D [229 x 330 mm]).
Model 1718 ovens are designed for pan sizes up to a
standard 1/2-size sheet pan (13"W x 18"D [330 x 457 mm]).
WARNING
Read all safety messages in the IMPORTANT SAFETy
INFORMATION section before operating this equipment.
In the event of emergency, unplug unit (Model 1313) or turn
OFF Main Disconnect switch (Model 1718).
CAUTION
BURN HAzARD: Some exterior surfaces on unit will get
hot. Avoid unnecessary contact with unit.
Use caution and be aware of pinch points when slider
assembly is moving.

Menu Item Information

matchbox Ovens are designed to provide unequaled flexibility
and efficiency. Each oven has the capability of storing 1024
custom menu items. menu items can be organized into
Categories that group together similar items, such as different
varieties of pizza. a total of 128 Categories can be created, with
each Category able to contain 128 specific menu items. all
Categories and/or menu items appear on the menu screen.
NOTE: It is not necessary to use Categories. The oven can be
set up using specific menu items only.
at initial startup,the menu screen will show either sample menu
items or customer-specific, preloaded menu items. If the menu
screen shows sample menu items, these menu items can be
used to help develop specific menu items appropriate for the
installation. Refer to the "Programming menu Items" procedure
in this section for instructions on creating menu items.

Startup

1. On model m1718, make sure the main Disconnect switch
is in the ON (I) position.
2. move the Standby switch up to the "On" position.
• The touchscreens will energize. One touchscreen
shows the available setpoint temperatures. The other
touchscreen shows the name of the oven and current
software version.
LEFT TOUCHSCREEN
Touch desired
setpoint
temperature.
Startup Screens
RIGHT TOUCHSCREEN
Touch appropriate
arrow to move
slider assembly.
3. Touch the desired setpoint temperature on the left
touchscreen.
• The slider assembly will move to its default position, if it
is not already there.
• The oven heaters, air blowers, and cooling fans will start
up. allow 10–15 minutes for the oven to reach setpoint
temperature.
• The left touchscreen shows the selected setpoint
temperature and the estimated time remaining to reach
setpoint temperature.
• The right touchscreens shows the selected setpoint
temperature and the current cavity temperature.
LEFT TOUCHSCREEN
Heatup Screens
When the oven reaches setpoint temperature, the oven begins
a temperature stabilizing period (a countdown screen appears).
OVEN TEMPERATURE STABILIZING OVEN TEMPERATURE STABILIZING
TIME REMAINING TIME REMAINING
Oven Stabilizing Screen
after the oven temperature stabilizes, the main menu screen
appears on one of the touchscreens, dependent upon the location
of the slider assembly. The oven is now ready for cooking.
LEFT TOUCHSCREEN
Touch arrow to move slider assembly from
right-to-left and use left touchscreen.
main menu Screen
NOTE: The Menu items shown are for example only.
Depending on the configuration of the oven, the Main
Menu screen will show either sample menu items or
customer-specific, preloaded menu items.
8
English
RIGHT TOUCHSCREEN
5:00 5:00
RIGHT TOUCHSCREEN
Form No. OVmm-1013