Operation; General; Menu Item Information; Startup - Ovention Double MiLO Manuel D'installation Et D'utilisation

OPERATION

General

Use the following information and procedures to operate an
Ovention Double MiLO™ oven.
®
WARNING
Read all safety messages in the IMPORTANT SAFETY
INFORMATION section before operating this equipment.
In the event of emergency, unplug unit.
CAUTION
BURN HAZARD:
• Some exterior surfaces on unit will get hot. Avoid
unnecessary contact with unit.
• Pan/tray will be very hot upon removal—use oven mitt,
pan gripper, or other utensil to remove.

Menu Item Information

Double MiLO ovens are designed to provide unequaled
flexibility and efficiency. Each oven chamber/touchscreen
combination has the capability of storing 1024 custom menu
items. Menu items can be organized into Categories that group
together similar items, such as different varieties of pizza. All
Categories and/or menu items appear on the Main Recipes
screen(s).
NOTE: It is not necessary to use Categories. The oven can be
set up using specific menu items only.
At initial startup, the Main Recipes screen will show either
sample menu items or customer-specific, preloaded menu
items. If the Main Recipes screen shows sample menu items,
these menu items can be used to help develop specific menu
items appropriate for the installation. Refer to the "Programming
Menu Items" procedure in this section for instructions on
creating menu items.

Startup

Use the following procedure to
start up each oven chamber.
1. Make sure both
switches are in the I (On)
position.
2. Move the Standby switch up
to the "On" position.
• The touchscreen will energize and show
the name of the oven and current software
version for a few seconds.
Startup Screen
Upper
Chamber
GFCI
Switch
GFCI
Lower
Chamber
GFCI
Switch
• After the Startup Screen, the Select Oven Temperature
screen appears. Three pre-set setpoint temperatures
are available on the screen.
3. Touch the desired setpoint temperature on the touchscreen.
• The IR elements, air blowers, and cooling fans will start
up. Allow 10–15 minutes for the oven to reach setpoint
temperature.
• The touchscreen shows the selected setpoint
temperature and the current chamber temperature.
When the oven reaches setpoint temperature, the oven begins
a temperature stabilizing period (a countdown screen appears).
"On"
After the oven temperature stabilizes, the Main Recipes screen
appears on the touchscreen. The oven is now ready for cooking.
8
English
Touch desired
setpoint temperature.
Startup Screen
Touch to return to Select Oven
Temperature Screen and select
a different setpoint temperature.
Preheat Screen
Oven Stabilizing Screen
Form No. OVMILOM-0817