Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Panel Descriptions
Front Panel
1
2
1
Power – Press to turn the unit on and off.
2
Power Indicator – Illuminates red to signal the DC power supply is
connected to an outlet and the KVM switch is turned on.
3
Input Selector – Illuminates blue to indicate whether PC1 or PC2 has been
selected. Select LEDs flash in a loop during automatic switching mode.
Online LEDs illuminate when the corresponding USB-B port is connected.
4
IR EXT – Connect the included IR Extender for IR signal reception from
the included IR Remote Control.
5
IR – Signal reception point for the IR Remote Control.
3.5 mm Microphone – Connect a microphone.
6
7
3.5 mm Stereo – Connect a stereo audio device.
8
USB-A 3.0 – Connect USB peripherals (printers, scanners, U-disks, etc.).
Rear Panel
9
9
Outputs
a. Connect a mouse and keyboard to the USB 2.0 ports.
b. Connect an amplifier to the 3.5 mm stereo port.
c. Connect a microphone to the 3.5 mm microphone port.
d. Connect a local HDMI monitor to the HDMI Out port.
10
PC1 Input – Connect to a computer's HDMI, USB, stereo audio
and microphone ports.
11
PC2 Input – Connect to a second computer's HDMI, USB,
stereo audio and microphone ports.
12
DC 5V Input – Connect the included 5V/3A DC power supply.
3
4
5
10
4
6
7
8
11
12
Publicité
Table des Matières
