Features; Front Panel - Tripp-Lite B004-HUA4-K Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Features

• 4-Port HDMI/USB KVM switch with 2.1-channel surround-sound audio and USB 2.0 peripheral sharing (B004-HUA4-K
• Built-in 2-Port USB 2.0 hub allows USB devices to be shared between computers connected to the KVM switch
• 3.5 mm Mini Stereo Speaker and Microphone jacks allow a single microphone to provide audio input to each of the
connected computers, and let you listen to the audio output of each computer on a single set of speakers
• An additional set of console audio jacks is conveniently located on the front panel of the KVM switch, making them ideal for
use with speakers and microphones
• The KVM, USB and Audio can be switched independently of each other
• Switch between connected computers via front-panel push buttons or keyboard hotkeys
• Auto Scan mode allows you to scan the connected computers without having to manually switch between them
• Supports digital video resolutions up to 1920 x 1200 @ 60 Hz (1080p)
• Multi-platform support – Compatible with Windows, Mac and Linux
• Supports hot-plugging – Computers and devices can be unplugged and re-plugged without having to shut down the KVM
switch
• The KVM switch stores the monitor's EDID (Extended Display Identification Data) to optimize display resolution
• LEDs provide for easy monitoring of connected computers
• HDCP and HDMI compliant
• Console mouse port emulation/bypass feature supports most mouse drivers and multifunction mice
• Console keyboard port emulation/bypass feature supports most gaming/multimedia keyboards
• Quick installation without the need for software
• Mac keyboard support and emulation*
• Firmware upgradeable
*PC keyboard combinations emulate Mac keyboards. Mac keyboards only work with their own computers.

Front Panel

1
Port Selection Push Buttons: Pressing a push button will bring the focus of the KVM only, Audio only, USB only, or the
KVM, Audio and USB simultaneously. See Manual Push Buttons in the Basic Operation section of the manual for
details.
2
Port LEDs: Each port contains a set of ON LINE (Orange) and USB LINK (Green) LEDs. The ON LINE (Orange) LED
represents the status of the KVM. The USB LINK (Green) LED represents the status of the USB 2.0 hub ports. Listed
below are descriptions of the different statuses indicated by the LEDs.
• A dimly lit Orange LED indicates that a powered-on computer is connected to the corresponding port, but is not in
focus.*
• A brightly lit Orange LED indicates that the corresponding port currently has the focus of the KVM.*
• A flashing Orange LED indicates that the corresponding port is currently being accessed in Auto Scan mode.
• When all of the Orange LEDs are flashing, it indicates that the KVM is currently in Firmware Upgrade mode.
• A brightly lit Green LED indicates that the corresponding port currently has the focus of the USB 2.0 hub ports.
* On Line status is detected by the USB connection from the KVM cable. As such, if your source device does not support USB, the
KVM's On Line status LED will not illuminate dim Orange. When that source is selected, the LED will illuminate as dim Orange, rather
than bright Orange.
1
2
3
3
4

Publicité

Table des Matières
loading

Table des Matières