Mono Button; Rds And Rbds Tuning; Disp Button; Pty Button - Rotel RSX-1562 Manuel De L'utilisateur

44
2. Enter the first digit of the station frequency using the NUMERIC
buttons. The digit will appear in the frequency display and the second
bar will flash. Enter the remaining digits of frequency. When all of
the necessary digits have been entered, the receiver will tune to the
displayed station frequency. Note that entering a station frequency is
slightly different for the USA and Europe.
In the USA:
FM87.50MHz
FM101.90MHz
AM1410Hz
In Europe:
FM87.50MHz
FM101.90MHz
AM1410Hz

MONO Button

-
The MONO button on the front panel change the FM mode from
stereo reception to mono reception. In stereo mode, a stereo signal
will be heard if the station is broadcasting a stereo signal and there is
sufficient signal strength. An ST indicator will light in the front panel
display. In mono mode, a mono signal will be heard even if the
station is broadcasting a stereo signal.
Note: Switching to mono mode can improve the reception of weak
or distant FM signals. Less signal strength is required for clean mono
reception than for stereo reception.

RDS and RBDS Tuning

This Rotel receiver is equipped with RDS (Radio Data Systems)
reception capabilities for Europe and RBDS (Radio Broadcast Data
Service) capabilities for the United States. These broadcast systems
provide additional functionality to FM radio reception by transmitting
encoded information along with the radio signal. This signal is
decoded by an RDS or RBDS receiver and can provide a range of
informational features including:
1. A display of station's identifying name (e.g. BBC1).
2. A display of the station's program content (e.g. ROCK or NEWS)
3. Traffic information broadcasts.
4. A scrolling text display for announcements or information.
5. Search for a station with the desired program content (PTY)
RDS broadcasting has been widely available in many European
markets for years. There are a large number of RDS stations and most
users will be familiar with the features and operation. In the USA,
implementation of RBDS system is more recent. Fewer stations are
broadcasting RBDS signals and the feature may be less familiar to
many users. Consult your authorized Rotel dealer for more information
on RDS or RBDS broadcasting in your area.
Note: The RDS and RBDS features are entirely dependent on
the broadcaster sending encoded signals. Thus, they will only be
available in markets where RDS or RBDS is implemented and where
Press: 8>7>5
Press: 1>1>9
Press: 1>4>1
Press: 8>7>5>0
Press: 1>1>9>0
Press: 1>4>1>3
RSX-1562 SURROUND SOUND RECEIVER
stations are broadcasting there data signals. If there are no RDS or
RBDS stations, the unit will function as a standard radio receiver.
Note: RDS and RBDS services are only available on FM broadcasts.
The features and buttons described below are only operational in FM
mode.

DISP Button

D
There are five display options when the currently tuned station is
broadcasting RDS information and the RDS indicator in the front panel
display is lit. Press the DISP button on the remote to step through the
five display options:
1. Standard FREQUENCY display.
2. PROGRAM SERVICE name. This is typically the station's call
letters, such as BBC1. If the current station is not broadcasting an RDS
signal, the display will show "NO NAME DATA".
3. PROGRAM TYPE. This is the description of the station's content
from a standardized list of program types in each market. If the
current station is not broadcasting an RDS signal, the display will show
"NO PTY DATA".
4. CLOCK TIME. A time and date display broadcast by the station.
If the current station is not broadcasting an RDS signal, the display will
show "NO TIME DATA".
5. RADIO TEXT. Additional scrolling text messages broadcast by
the station. If the current station is broadcasting radio text data, an
RT indicator lights in the display and the scrolling text appears. If the
current station is not broadcasting an RDS signal, the display will show
"NO TEXT DATA".

PTY Button

K
The PTY search function permits you to scan available broadcasts for
RDS stations broadcasting a particular type of program content.
1. Press the PTY button. The current RDS program type will appear in
the display.
2. If desired, change to a different PROGRAM TYPE using the
TUNING UP/DOWN buttons to scroll through the list.
3. Press the PTY button a second time within 10 seconds. The tuner
will attempt to find an RDS station broadcasting the selected type of
program. If the button is not pressed within 10 seconds after selecting
a program type, the PTY function will be cancelled.
4. If no station is located for the desired content type, the tuner will
return to the last previously tuned station.
5. Cancel the PTY function by pressing any other button.
Note: If the currently tuned station is broadcasting PTY data, a PTY
indicator lights in the front panel display.