Cochlear Baha Cordelle II Mode D'emploi page 11

English
Sound sources accessed
M/T switch position
M
M/T
T
Safety instructions when connecting external equipment
Only connection cables and accessories that are supplied or approved by
Cochlear should be used. Non-standard connection cables can cause damage to
the sound processor and injury to you. If in doubt, consult your audiologist.
Cochlear is not liable for any damages arising as a result of this, or any other
form of incorrect use of the product or its parts.
20
All manuals and user guides at all-guides.com
Direct audio input NOT Direct audio input
connected connected
Microphone only Microphone only
Microphone and telecoil Microphone and direct audio
input
Telecoil only Direct audio input only
Warning! It is extremely dangerous and potentially fatal to connect
any equipment that is plugged into a 110 and/or 220 V power supply
without using the audio adapter.
Abutment cover
An abutment cover is included in the sound processor kit. The cover helps
conceal and protect the abutment when the sound processor is not in place.
This improves aesthetics and prevents dirt from collecting in the abutment,
which helps maintain a good snap connection between the abutment and sound
processor. Simply press the cover gently onto the abutment.
Share the Experience
The test rod provided can be used by others so that they can listen to your Baha
sound processor themselves. Snap the unit onto the test rod and hold the rod
against the skull bone behind the ear while keeping the ears plugged (take care
not to allow the sound processor to touch anything except the test rod as this
may cause feedback).
English
21