Breville the Infuser Livret D'instructions page 32

All manuals and user guides at all-guides.com
TROUBLESHOOTING
PROBLEM
Pulsing/pumping
sound while
extracting espresso
or steaming milk.
Water leaking.
Machine is On but
ceases to operate
32
POSSIBLE CAUSES
• The machine is carrying
out the normal operation
of the 15 bar Italian
pump.
• Water tank is empty.
• Water tank is not fully
inserted and locked into
position.
• Auto purge feature.
Water is automatically
released into the
drip tray after the
steam and hot water
functions to ensure the
thermocoil is at the
optimal temperature for
extracting espresso.
• Water tank is not fully
inserted and locked into
position.
• The silicone seal
surrounding the shower
screen needs to be
replaced to ensure the
portafiler is properly
secured into the group
head.
• The safety thermal-cut
out may have activated
due to the pump
overheating.
WHAT TO DO
Fill tank.
Push water tank down
completely to lock into place.
Ensure the drip tray is firmly
pushed in place after using the
steam and hot water functions.
Push water tank down
completely to lock into place.
Refer to "Using the Allen Key",
page 26.
Turn the machine Off and
allow to cool for about 30-60
minutes.
If problem persists, call Breville
Consumer Service on:
1-866-273-8455 (USA)
1-855-683-3535 (Canada).