Operating Introductions; Standard Operation - Cooling Mode - Friedrich M36YJ Manuel Du Propriétaire

Operating Introductions

Standard Operation - Cooling Mode

FAN
SPEED
TEMP
1
2
OPER
MODE
3
4
Cooling operation will begin if you press
the button.
Press the temperature button and set the
desired room temperature lower than the
current room temperature.
A click of the button will increase the
desired temperature by 2°F or 1°C.
TEMP
A click of the button will decrease the
desired temperature by 2°F or 1°C.
- Setting temp range : 64°F~86°F(18°C~30°C)
- If the desired temperature is set higher than
the current room temperature, the cooling
function will not begin and just the blowing
operation will continue.
If you prees the mode button during the
operation, the operation mode will be
changed in the order of cooling,
dry(dehumidification),heating,auto-operation
and fan operation. If the product is a
cooling-only model, the operation mode will
be changed in the order of cooling,
dry(dehumidification), auto-operation and fan
operation.
If you press the button, the cooling
operation will stop.
Operating Introductions
Owner's Manual 7