Power Fist 8913212 Mode D'emploi page 6

8913212
11. NEVER hold onto the hose or fittings during operation. This can allow
pressurized water to escape and inflict an injury.
12. DO NOT plug this pressure water into a hot water supply. This pressure
washer is designed for cold water use only.
13. Prior to starting the pressure washer in cold weather, be sure ice has not
formed in any part of the equipment.
14. Ensure the pressure washer is not covered during operation to avoid
overheating the motor.
15. This pressure washer is capable of producing pressures up to 3,100 PSI. To
avoid property damage and personal injury, do not operate the pump with
components rated for less than 3,200 PSI working pressure.
16. If connecting the pressure washer to a portable water system, ensure the
water system is protected against backflow.
17. NEVER attach or remove wand or hose fittings while system is
pressurized.
18. Never transport or make adjustments to this unit while it is running.
19. Do not allow the high pressure hose to come in contact with any hot
part of the unit. The hose might be damaged, possibly causing it to
burst or leak under high pressure.
20. Shut off the pressure washer if it is leaking water. Discharge all
pressure before tightening fittings or having repair work done by a
qualified technician.
SPRAYING PRECAUTIONS
DANGER! The pressure washer produces fluid pressures and velocities
strong enough to penetrate human and animal flesh that will result in
serious injury or amputation with some nozzles.
DANGER! NEVER aim the pressure washer spray gun in the direction of
people or animals, even if the power and water supply are turned off. High
velocity fluid spray can cause objects to break, propelling particles at high
speeds.
1. Keep operating area clear of all persons, animals and obstacles.
2. DO NOT spray flammable or toxic liquids.
3. DO NOT spray near a power source.
4. DO NOT lock the spray gun in open position.
5. Only use a spray gun that has a trigger lock or trigger guard in place
6
Gas Pressure Washer
For technical questions call 1-800-665-8685
V1.1