Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8913212
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-
lit and free of distractions. Place lights so you are not working in a
shadow.
2.
Keep anyone not wearing the appropriate safety equipment away from
the work area.
3.
Store tools properly in a safe and dry location. Keep tools out of the
reach of children.
4.
Do not install or use in the presence of flammable gases, dust or
liquids.
5.
Using a pressure washer can create puddles and slippery surfaces. The
work area should have adequate slopes and drainage to reduce the
possibility of falling due to slips.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply with
CSA Z94.3-07 or ANSI Z87.1 standards based on the type of work
performed.
a.
Use indirect vented safety goggles designed for wet conditions to
protect eyes from injury. Spray from this unit has extreme pressure
and can ricochet back splashing water or propelling objects towards
eyes.
2.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
3.
Wear protective clothing designed for the work environment and tool.
4.
Non-skid footwear is recommended to maintain footing and balance in
the work environment.
5.
This tool can cause hearing damage. Wear hearing protection gear with
an appropriate Noise Reduction Rating to withstand the decibel levels.
4
Gas Pressure Washer
For technical questions call 1-800-665-8685
V1.1
Publicité
Table des Matières
