Oase ProfiClear Premium Notice D'emploi page 62

- GB -
System message Functions that are still
available
E r 5 5
E r 5 5 More than 960 cleaning
−
cycles in 48 hours
−
−
E E r r 6 6 6 6 Switch element for rinsing None
pump in the control system
overheated
62
Possible cause
Manual cleaning Temporary heavy soiling
Automatic mode Start-up phase of the filter system
−
Time-dependent cleaning (e.g. during the first start-up)
Fish are spawning
−
Pond heavily soiled
Screen elements heavily soiled
Insufficient cleaning effect due to soiled
nozzles
Water level in the system too high:
Outlet pipes soiled
−
Outlet opening too small
−
Max. flow quantity exceeded
−
Control system is exposed to excessive
heat (sun, ambient temperature)
Remedy
Wait until the soiling decreases
This operating status is atypical. Avoid long-term operation
−
in this state.
Clean the pond
−
Reduce the amount of soiling
−
Clean and decalcify screen elements (→ Replacing screen
element)
Clean the nozzles
−
Clean outlet pipes
−
Enlarge outlet opening
−
Reduce flow rate
−
Protect the control system from heat
Resetting the system
message
On|Off
Press key for 5 sec
−
Automatic if the number of
−
cleaning procedures drops
below 960.
Automatic when cooled down