Samsung DVD-HR773 Mode D'emploi page 39

Power Save Setting
•
On: If it is set to On and you turn off the HDD & DVD recorder, the
recorder enters the Power Save and the front panel
display goes off.
•
Off : Does not set to Power Save. Normally select OFF mode.

M
In standby mode with "Power save mode" on, Some function is not
available.
Signal from ANT OUT of Recorder to ANT IN of TV will be noisy.
Signal from AV2(EXT) can not be transfered to AV1(TV). If you want to
use, set "Power save mode"off Refer to page 22 and 23.
Anynet+ (HDMI CEC)
Anynet+ is a function that can be used to operate the recorder using a
Samsung TV remote control, by connecting the HDD & DVD
RECORDER to a SAMSUNG TV using an HDMI Cable. (See pages
30~31)
(This is only available with SAMSUNG TVs that support Anynet+.)
1. Press the ▲▼ buttons to select Anynet+ (HDMI CEC), then press
the OK or ► button. Anynet+ (HDMI CEC) items will be displayed.
2. Press the ▲▼ buttons to select On, then press the OK or ►
button.
For using Anynet+ (HDMI CEC)
1. Connect the HDD & DVD RECORDER to a Samsung TV with an HDMI cable. (See pages 30~31)
2. Set the Anynet+ (HDMI CEC) to "On" on your HDD & DVD RECORDER.
(see above)
3. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
•
You can operate the HDD & DVD RECORDER by using TV
remote control.
(TV buttons that can be used to control the HDD & DVD RECORDER :
, , , ,
•
When you press Anynet+ button on the TV remote control, the
OSD to the left will appear.
- Select Device : Use this option to select device.
- Record : Use this option to start recording or stop recording.
- Menu on Device : Same as MENU button (
DVD RECORDER remote control.
- Device Operation : Same as INFO button (

M
By pressing the STANDBY/ON button of the recorder while watching TV, the TV screen will change to the play
screen.

If you power on a DVD recorder when the TV power is off, the TV will power On.

If you turn the TV off, the HDD & DVD Recorder will power off automatically. (When the HDD & DVD Recorder is
recording, it can't be powered off.)

If you change the HDMI to other sources (Composite, Component, RF... etc) in TV while playing the DVD disc, the
HDD & DVD Recorder will stop playing. But the HDD & DVD Recorder may keep the DVD disc Recording.
, and , buttons,
HDD & DVD RECORDER
HDD
Timer Record
Disc Manager
m
MOVE
HDD & DVD RECORDER
HDD
Timer Record
Disc Manager
m
MOVE
DVDR
View TV
Select Device
Record
Menu on Device
~ button)
Device Operation
Receiver
Setup
>Move
eExit
) on the HDD &
) on the HDD & DVD RECORDER remote control.
System
|
Clock Set
Library
|
Auto Power Off : Off
|
Power save : Off
Off
|
On
Anynet+ (HDMI CEC) : On
|
Setup
DivX(R) Registration
s r e
SELECT RETURN EXIT
System
|
Clock Set
Library
|
Auto Power Off : Off
|
Power save : Off
|
Anynet+ (HDMI CEC) : On
Off
|
Setup
DivX(R) Registration
On
s r e
SELECT RETURN EXIT
n
: Off
sEnter
<TV Menu>
English _39