Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6.
Auto channel scan will be started.
•
The number of stations automatically stored by the HDD & DVD
RECORDER depends on the number of stations that it has found.
7.
After auto channel scan is completed, auto clock setting will be
started automatically in 10 seconds. If you want to start auto clock
setting immediately, press OK button.
8.
Wait until current date and time are displayed automatically. If you
want to exit auto clock setting, press MENU button.
M
Now, your HDD & DVD RECORDER is ready for use. "Plug & Play Setup" is
complete. If you want to change it, you can by Presetting the Stations
manually "Channel Set – Manual Setup" menu. (See page 37)
Auto setup function can be performed by pressing STOP ( ) on the
unit continuously for 10 seconds or more during power off with no disc
inserted.
9.
Check the date and time.
•
If it is Correct, press OK button then the date and time will be
saved. If you don't press the OK button, the date and time will be
saved automatically after 5 seconds.
•
If it is Incorrect, input correct Month, Day, Year, Hour or Minute
using ▲▼, ◄► buttons or number buttons. Press OK button
then the date and time will be saved. When you need to change
clock setting, you can set it up manually.
Auto channel scan completed successfully.
Press the [OK] button to auto clock set.
OK
Please wait. Now setting the clock.
If you want to exit clock setting,
press the [MENU] button.
Clock Set
mo.
da.
yr.
hr.
min. Auto
JAN
01
2009
12
00
On
Tuesday
English _35
Publicité
Table des Matières
