Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49

SPECIFICATIONS

ENGINE:
Brand
Model Series
Gross Torque*
Type
Displacement
Starting System
Alternator
Oil Capacity
Motor Oil
Fuel Tank Volume
Spark Plug Gap
Resistor Spark Plug
Long Life Platinium Spark Plug
Ignition System
AUGER/IMPELLER:
Clearing Width
Intake Height
Auger/Impeller Diameter
Number of Impeller Blades
CHUTE:
Chute Deflector
Chute Rotation
DRIVE SYSTEM:
Drive Type
Drive Speeds
Tire Size
Tire Inflation
ENGINE POWER RATING INFORMATION
*The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code
J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with
SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross en-
gine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both
the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equipment,
the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This
difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel
pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to
manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
26
Model No.
1695903
Briggs & Stratton®
TM
Professional Series
16.50 T.P. @ 3060 rpm
4-Cycle - OHV
20.9 cu in. (342 cc)
Recoil, 230V Electric without Cord
9 Amp Regulator
28 oz (0,83 liters)
Synthetic 5W30
4.0 qts (3,8 liters)
0.030 in. (0,76 mm)
491055
5066
Complies with Canadian standard ICES-002.
28 in. (71,1 cm)
19.75 in. (50,2 cm)
14 in. (35,6 cm)
4
Remote
Electric 200°
Friction Disc - Pro Easy Turn
5 Forward, 2 Reverse
16 x 4.8 in. (41 x 12 cm)
See the sidewall of the tire for the proper inflation.
TM
www.simplicitymfg.com

Publicité

Table des Matières
loading

Table des Matières