Polaroid OneStep+ Manuel page 8

Box contents How to use
the OneStep+
01 OneStep+ Camera Charge the camera
02 USB Charging Cable Important The OneStep+ will
03 User Manual not be fully charged upon
04 Camera Neck Strap
purchase — it should be fully
charged before first use. To
charge the camera, plug
the USB charging cable into
the Micro-USB slot on the
camera's back panel, and
the other end of the cable
into a charger, such as a
smartphone adapter or your
computer's USB slot. The
red flash charge LED will turn
off when the battery is fully
charged.
A full charge usually takes
about 2 hours through a
wall socket with a smart-
phone adapter, or up to 4
hours through a computer's
USB slot. A fully-charged
OneStep+ camera will have
enough power to shoot 15-20
packs of film, depending on
usage. Remember to turn
your camera off after every
use to conserve battery life.
All manuals and user guides at all-guides.com
1. Turn the the camera automatically,
camera on/off underneath the film shield.
To turn the camera on, slide The plastic film shield is
the power switch into the ON designed to protect images
position (down). The flash from light as they develop — it
charging LED on the back pan- should not be removed. Take
el will start blinking to charge the darkslide out from under
the flash, and the remaining the film shield and let the film
film counter on the top of the shield roll back up. If the dark-
camera will light up to indicate slide has not ejected, remove
that the camera is switched the film pack and re-insert it,
on, and show the amount of re- making sure it is pushed all
maining film if a film cassette is the way to the back of the
loaded. To turn the camera off camera.
again, return the power switch
4. Set the Flash
to the OFF position.
& Lighten/Darken
2. Load the film Flash The camera flash will
Slide the film door latch to the trigger by default when you
right to open the film door. shoot with the OneStep+. To
Push the film cassette all the shoot without the flash, press
way in, with the film's darkslide and hold the flash override but-
facing up. ton on the back panel as you
Note Please check press the shutter button.
Warning Shooting without
individual film packaging
for development time, flash will reduce camera
handling and storage performance and picture
details. quality in most lighting
situations except brightly-
3. Close film door lit, sunny environments.
When you close the film door, We recommend always
the darkslide will eject from shooting with flash.