Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Using the self-timer
has been activated, just press
The OneStep+ has a self-timer
the Plus button once again.
function allowing you to place
How much film is left
yourself in your photos or
create perfectly-timed photo-
in the pack
graphs. To use the self-timer,
There are 8 orange LED lights
press the Plus button twice
on top of the camera. When
quickly. The button will light
the OneStep+ is switched on
up to solid orange, indicating
and not in sleep mode, the
that the self-timer is activated.
LEDs will constantly display
Once you have framed your
the film count. The number
photo, press the shutter but-
of LEDs which light up cor-
ton lightly. The self-timer uses
responds to the number of
an 8-second interval between
shots left in the film pack. For
pressing the shutter button
example: If 6 LEDs light up,
and taking the photograph.
that means there are 6 shots
Once triggered, the orange
left in the film pack. If you
LED will blink to indicate
have used up all 8 shots in the
the self-timer countdown.
film pack, or if there is no film
In bright or sunny environ-
pack inserted in the camera,
ments, the camera flash will
then the LEDs will blink rapidly
also countdown with short,
when you turn the camera on.
low-power flashes.
Note When using the
How much battery
you have left
self-timer to shoot, the flash
will trigger automatically. To
The camera has 3 battery
make self-timed photos with-
states, indicated by the cam-
out flash, activate the self-tim-
era's flash charge LED light:
er, then press and hold the
1. Battery charged:
flash override button as you
Enough charge for at least 2
press the shutter button. To
packs of film.
cancel a self timer shot after it
The flash LED will blink green
All manuals and user guides at all-guides.com
whilst charging between
Once you release the Plus
shots, and will be solid green
button, the LEDs will return to
when ready to shoot.
displaying the number of shots
2. Battery low:
remaining in your film pack.
Enough charge for about
1 pack of film.
Compatible Film
The flash LED will blink orange
The OneStep+ works with
whilst charging between
all Polaroid Originals i-Type
shots, and will be solid orange
and 600 type film packs. We
when ready to shoot.
recommend using i-Type film
3. Battery empty:
as it is optimized for use with
No charge remaining.
the OneStep+.
The flash led will blink red,
and the camera will cease to
Power supply
operate until it is recharged.
Charge the OneStep+ before
A fully-charged OneStep+
use to ensure it has enough
camera will have enough
power for the duration of your
power to shoot 15-20 packs of
shoot (see →Charge the Cam-
film, depending on usage.
era). The flash charge LED will
be solid red whilst the camera
Checking your camera's charge
is plugged in and charging,
To check the camera's charge
and will turn off once the
at any time, switch the camera
camera is fully charged.
off, then switch it back on
Attach the camera neck strap
whilst holding down the Plus
button. The 8 film counter
See page 8 for guide to
LEDs on top of the camera will
attaching your neck strap.
light up, indicating how much
Using a Tripod
battery remains.
For example: If 6 LEDs light
The OneStep+ has a tripod
up, that means the camera has
socket in its base, which
6/8 (75%) charge remaining.
works with most standard
Publicité
Table des Matières
