Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Lighten/Darken Use the light-
shooting — so you will
en/darken switch on the right
need to adjust your aim
side of the lens barrel to adjust
to compose your shot
the exposure of your shot. To
correctly when shooting
get a brighter photo, move the
at distances of 1.2 meters
lighten/darken switch right to
or less.
the plus/lighten position. For a
6. Compose your photo
darker photo, move the light-
en/darken switch left to the
The OneStep+ has two
minus/darken position. These
high-quality lenses; a standard
two settings correspond to
lens, intended for photographs
different Exposure Values (EV).
shot from 60 cm (2 feet) away
The camera's Exposure Values
and further; and a portrait lens,
are +½ EV (when you move the
intended for photographs shot
switch to plus/lighten) and -½
from as close as 30 cm (1 foot)
EV (when you move the switch
away to 90 cm (3 feet) away. To
to minus/darken).
select the desired lens, use the
Lens Switch located above the
5. Using the viewfinder
Lens Barrel. To avoid a blurry
The OneStep+ uses a tradition-
photo, make sure you are at
al viewfinder located on the
least 60 cm (2 feet) away from
right side of the lens barrel. To
your subject when shooting
use the viewfinder, simply align
with the standard lens, or
your eye with the viewfinder
30 cm (1 foot) away when
barrel and use the image you
shooting with the portrait lens.
see to compose your shot.
For the best results, always try
Note Remember that the
to shoot with your light source
viewfinder sits slightly
behind you.
above and to the right
of the camera's lens —
7. Take the photo
above and to the left from
Press the shutter button all
your perspective when
the way in to take the photo.
All manuals and user guides at all-guides.com
The photo will be ejected from
Pairing with Bluetooth
the slot at the front of the
The OneStep+ features
camera as soon as you let go
Bluetooth connectivity,
of the shutter button. It will be
allowing it to be connected
shielded from the light by the
to the Polaroid Originals
film shield, and will be held in
smartphone app, unlocking a
place until you are ready to
range of creative features. To
remove it.
pair your OneStep+ with your
smartphone, press the Plus
8. Remove and shield the photo
button (located to the left of
Remove the photo from
the camera's lens barrel) once.
beneath the film shield and let
The Plus button LED will flash
the film shield roll back into the
blue, indicating that it is in
camera. Place the photo face
pairing mode and waiting for a
down to continue shielding it
new connection. Ensure your
from light as it develops.
phone's Bluetooth is switched
on and open the Polaroid Origi-
nals app, choosing the
Further Guidance
OneStep+ option. The camera
will connect automatically. Once
Using the portrait lens
your camera and smartphone
The OneStep+ has two high-
are paired, the Plus button will
quality lenses; a standard
change to solid blue, indicating
lens, intended for photographs
that it is successfully paired.
shot from 60 cm (2 feet) away
To pair your OneStep+ with
and further; and a portrait
a new device, ensure that
lens, intended for photographs
Bluetooth is switched off on
shot from as close as 30 cm
the current paired device, then
(1 foot) away to 90 cm (3 feet)
press and hold the Plus button
away. To select the desired
for 3 seconds. The Plus button
lens, use the Lens Switch
LED will flash blue, indicating it
located above the Lens Barrel.
is now in pairing mode.
®
Publicité
Table des Matières
