Saw Blades, Other Accessories; Warranty; Conditions Of 1+2 Warranty - Festool TS 55 EQ Guide D'utilisation

16.1
The guide clearance of the saw table on the
guide rails can be set with the two setting jaws
(16.1).
The guide rails are equipped with a splinterguard
(16.2), which has to be cut to size before the
fi rst use:
- Set the speed of the machine to level 6,
- Place the machine on the rear end of the guide
rail,
- Switch the machine on, press it down to the set
cutting depth and cut the splinterguard along
the full length without interruption. The edge
of the splinterguard now corresponds exactly to
the cutting edge.
17.1
The splinter guard needs to be replaced if it
becomes damaged or worn:
- Peel the original splinter guard (17.1) away from
the guide rail.
- As needed, clean residual adhesive and debris
from the guide rail.
- Peel off the plastic backing from the new splinter
guard to expose the adhesive.
- Without stretching the rubber, carefully place
the new splinter guard on the underside of the
guide rail tight to the alignment rib (17.2).
- Make sure the splinter guard is fi rmly pressed
down to the guide rail.
- Trim the splinter guard as described before.
All manuals and user guides at all-guides.com
16.2
17.2
11
Multifunction table
18
The mutifunction table, which is available in two
sizes (MFT 800, MFT 1080), makes clamping the
workpiece easy and allows you to saw large and
small workpieces safely and precisely using the
guide system. Its many fi elds of application make
economical and ergonomically convenient work
possible.

Saw blades, other accessories

In order to be able to saw different materials
quickly and cleanly, Festool offers saw blades that
are specially designed for your machine.
The order numbers for these and for other acces-
sories that allow you to use your Festool portable
circular saw effectively and in many ways, can be
found in the Festool catalogue or on the Internet
under "www.festool-usa.com".

Warranty

Conditions of 1+2 Warranty

You are entitled to a free extended warranty (1
year + 2 years = 3 years) for your Festool power
tool. Festool shall be responsible for all shipping
costs during the fi rst year of the warranty. Dur-
ing the second and third year of the warranty the
customer is responsible for shipping the tool to
Festool. Festool will pay for return shipping to the
customer using UPS Ground Service. All warranty
service is valid 3 years from the date of purchase
on your receipt or invoice.
Festool Limited Warranty
This warranty is valid on the pre-condition that the
tool is used and operated in compliance with the
Festool operating instructions. Festool warrants,
only to the original consumer purchaser, that the
specifi ed tool will be free from defects in materi-
als and workmanship for a term of one year from
the date of procurement. Festool makes no other
warranty, express or implied, for Festool portable
power tools. No agent, representative, distributor,