Sony MFM-HT75W Mode D'emploi page 820

The "PIP Setting" menu appears on the screen.
Option
PIP
PIP Setting :
Sub :
Sub Size :
Sub Position
Audio Select :
Select
5 Press the M/m buttons to select the desired mode
and press the OK button.
• PIP On: Pictures from two input sources are displayed
on the screen. You can select the input for sub
picture, the sub picture's position, size, and
audio input source.
• PIP Off: The PIP function is turned off.
To select the input for sub picture (PIP function: On)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Option" menu appears on the screen.
3 Press the M/m buttons to select "PIP" and press the
OK button.
4 Press the M/m buttons to select "PIP Setting" and
press the OK button.
The "PIP Setting" menu appears on the screen.
5 Press the M/m buttons to select "PIP On" and press
the OK button.
6 Press the M/m buttons to select "Sub" and press
the OK button.
The "Sub" menu appears on the screen.
Option
PIP On
PIP Setting :
Sub :
Sub Size :
Sub Position
Audio Select :
Select
7 Press the M/m buttons to select the desired input
source and press the OK button.
• TV: A TV programme is displayed in the sub-picture
area.
• VIDEO 1: The picture sent from the video equipment
connected to the display's video input jacks for
VIDEO 1 is displayed in the sub-picture area.
• VIDEO 2: The picture sent from the video equipment
connected to the display's video input jack for
VIDEO 2 is displayed in the sub-picture area.
DVI-D: PC 1
PIP On
PIP Off
Large
Sub
1280 × 1024/60 Hz
Set Exit
OK MENU
(Option) and
DVI-D: PC 1
PIP On
TV
VIDEO1
VIDEO2
Sub
1280 × 1024/60 Hz
Set Exit
OK MENU
Note
The inputs for main/sub pictures must be selected as shown below.
Main Sub
PC 1 TV
PC 2 VIDEO 1
VIDEO 2
Note
When displaying a programme with teletexts on the sub-picture area, you
cannot switch the PIP function using the PinP button on the remote
control.
To switch off the PIP function, press the PinP button on the display, or set
"PIP Setting" menu to "Off."
To change the sub picture's size (PIP function: On)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Option" menu appears on the screen.
3 Press the M/m buttons to select "PIP" and press the
OK button.
4 Press the M/m buttons to select "PIP Setting" and
press the OK button.
The "PIP Setting" menu appears on the screen.
5 Press the M/m buttons to select "PIP On" and press
the OK button.
6 Press the M/m buttons to select "Sub Size" and
press the OK button.
The "Sub Size" menu appears on the screen.
Option
PIP On
PIP Setting :
Sub :
Sub Size :
Sub Position
Audio Select :
Select
7 Press the M/m buttons to select the desired size and
press the OK button.
• Large
• Middle
• Small
To change the sub picture's position (PIP function: On)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Option" menu appears on the screen.
3 Press the M/m buttons to select "PIP" and press the
OK button.
4 Press the M/m buttons to select "PIP Setting" and
press the OK button.
The "PIP Setting" menu appears on the screen.
5 Press the M/m buttons to select "PIP On" and press
the OK button.
(Option) and
DVI-D: PC 1
PIP On
TV
Large
Middle
Small
1280 × 1024/60 Hz
Set OK Exit MENU
(Option) and
27
GB