Sony MFM-HT75W Mode D'emploi page 772

Setting up channels manually
You can change the channel assignment or on-screen channel
numbers.
1 Press the MENU button.
2 Press the M/m buttons to select
press the OK button.
The "Channel" menu appears on the screen.
3 Press the M/m buttons to select "Channel Setting"
and press the OK button.
The "Channel Setting" menu appears on the screen.
4 Press the M/m buttons to select a channel number
button to change the setting and press the OK
button.
5 Press the M/m buttons to assign a different channel
to the button and press the OK button.
To select "Channel 3" by pressing the number button "1,"
select "3" in [CH].
6 Press the M/m buttons to select an on-screen
channel number and press the OK button.
You can select it from "1" to "62."
Repeat Step 4, 5 and 6 for all the channel number buttons that
you want to change the settings.
7 Press the MENU button to exit the menu screen.
16
(Channel) and
The channel number buttons
on the remote control.
TV channels assigned to the
corresponding number
buttons.
Channel numbers showing
on the screen. (On-screen
channel number)
Watching cable TV programs
If you are a cable TV subscriber, you can watch cable TV
programs (channel coverage C13 to C38) on the display.
For details on coverage area and subscription, contact your
nearest cable TV company.
1 Check that "Channel Selection" is set to "Direct."
2 Check that "Band" is set to "CATV."
For details on "Band" menu, see "Choosing between VHF/
UHF and VHF/CATV" on page 15.
Note
"UHF" is selected by default.
3 Press the M/m buttons to select "Channel Setting"
and press the OK button.
The "Channel Setting" menu appears on the screen.
4 Press the M/m buttons to select a channel number
button to change the setting and press the OK
button.
5 Press the M/m buttons to assign a different channel
to the button and press the OK button.
To select "Channel C38" by pressing the number button "1,"
select "C38" in [CH].
6 Press the M/m buttons to select an on-screen
channel number and press the OK button.
7 Repeat Step 4, 5, and 6 for all the channel number
buttons that you want to change the settings.
8 Press the MENU button to exit the menu screen.
Fine-tuning pictures
You can fine-tune the TV reception.
1 Press the MENU button.
2 Press the M/m buttons to select
press the OK button.
The "Channel" menu appears on the screen.
(Channel) and