Technical Specifications - Futurelight WL-250 Mode D'emploi

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly. The cooling-fans should be cleaned monthly.
The gobos may be cleaned with a soft brush. The interior of the fixture should be cleaned at least annually
using a vacuum-cleaner or an air-jet.
The dichroic colour-filters, the gobo-wheel and the internal lenses should be cleaned monthly.
To ensure a proper function of the gobo-wheel, we recommend lubrication in six month intervals. The
quantity of oil must not be excessive in order to avoid that oil runs out when the gobo-wheel rotates.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamp".
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature t
Maximum housing temperature t
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fitting lamps:
OMNILUX OSD 90V/250W GX-9,5 2000h 6700K
OSRAM HSD250 90V/250W GY-9,5 2000h
SYLVANIA BA250/2 SE D 90V/250W GY-9,5
PHILIPS MSD250 90V/250W GY-9,5 2000h
OSRAM HSD250/2 90V/250W GY9,5 3000h 7800K
PHILIPS MSD250/2 90V/250W GY-9,5 2000h
Recommended controllers:
FUTURELIGHT EX-6 controller
FUTURELIGHT CP-256/32 Controller
Wizard-512 DMX-Software + Interface
Wizard-1024 DMX-Software + Interface
Please note: Every information is subject to change without prior notice. 03.08.2004 ©
All manuals and user guides at all-guides.com
CAUTION!
220-250 V AC, 50 Hz ~
520 W
4
3-pin XLR
180 x 345 x 495 mm
12.5 kg
: 45° C
a
(steady state): 167° C
B
0.5 m
1 m
No. 89106005
No. 89106010
No. 89106120
No. 89106015
No. 89106110
No. 89106115
No. 51834046
No. 51834286
No. 51860102
No. 51860110
24/45 51833575_V_1_0.DOC