Storing The Appliance - Russell Hobbs RHFP1000 Manuel D'instructions

and then try again. Do not scrub the unit as this will damage the non-stick coating. Always
ensure that the socket is completely dry before inserting the thermostat control/ probe.

Do not use bleach or other abrasive substance or solvents to clean your appliance as it can be
damaging to the finish.

Do not immerse the unit in water or any other liquid, or hold it under a running tap.

To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in soapy
water or mild non-abrasive cleaner. Rinse and dry with a clean, dry, soft cloth.

After cleaning, completely wipe the frying pan dry with a soft cloth. Clean the frying pan after
each use.

To maintain a longer life of the non-stick coated surface on the inside of the pan, apply a very
light coat of cooking oil to the non-stick coating with a paper towel before storing. Repeat
periodically.

STORING THE APPLIANCE


Unplug the unit from the wall outlet and clean all the parts as instructed above. Ensure that all
parts are dry before storing.

Store the appliance in its box or in a clean, dry place.

Never store the appliance while it is still wet or dirty.

Never wrap the power cord around the appliance. Do not store the appliance with the
thermostat control/ probe inserted in the unit, always unplug it. Ensure the thermostat control/
probe is stored in a safe place where it will not be dropped, bumped or damaged.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating correctly, please check
the following:

You have followed the instructions correctly

The wall socket is switched on.

The mains power supply is ON.

The plug is firmly in the mains socket.
8