LG KG810 Mode D'emploi page 341

Browser
- Bearer: You can set the bearer data service.
1 Data/2 GPRS
- Data settings: Appears only if you select Data Settings as a Bearer/service.
IP address: Input the IP address to access WAP gate way.
Dial-up number: Enter the telephone number to dial to access your WAP gateway.
User ID: The users identity for your dial-up server (and NOT the WAP gateway).
Password: The password required by your dial-up server (and NOT the WAP
gateway) to identify you.
Call type: Select the type of data call : Analog or Digital (ISDN).
Call speed: The speed of your data connection; 9600 or 14400 ( Depends on
Operator)
Linger-time: You need to enter timeout period. After entering that, the WAP
navigation service will be unavailable if any data is not input or transferred.
- GPRS settings: The service settings are only available when GPRS is chosen as a
bearer service.
IP address: Input the IP address to connect GPRS.
APN: Input the APN of the GPRS.
User ID: The users identify for your APN server.
Password: The password required by your APN server.
90