Unloading A Used Instax Mini Film Pack - FujiFilm instax mini 70 Guide D'utilisation

Taking Pictures (Continued)
⁄
EN
Every time you take a photo, the number on the film
counter decreases from "10" to reflect the number of
remaining photos, and "0" is displayed when you have
used up the film pack.
When the film has been ejected (the camera stops making
a sound), grasp the edge of the film, then take it out.
• For details on taking out the film, refer to the instructions
and warnings on the FUJIFILM INSTAX mini film pack.
• The developing time is approximately 90 seconds. (The
time varies depending on the ambient temperature.)
When finished using the camera, always switch the
camera to "off" to maintain battery life. If the camera is
left switched "on" for 5 minutes without being used, it will
automatically switch to "off".
12
BO-7_EN_FR.indb 12
Unloading a used INSTAX mini film
pack
When "0" is displayed on the film counter, unload the film
pack following the procedure below.
~
Press down the back cover lock to open the back
cover.
Ÿ
Grasp the rectangular holes on the film pack, then
pull it out straight.
2015/6/3 13:11:40