Configuration
NTP
Note
The recorder can synchronise the time with an ex-
ternal server. Several server addresses are avail-
able on the Internet for this purpose.
Tick the "Enable NTP" box and then enter the inter-
1.
val at which the synchronisation should be made
again. Enter the IP address of the NTP server and
the NTP port.
2.
Confirm the settings by pressing Apply.
Email
In the event of an alarm, the device can send a message
by e-mail. Enter the e-mail configuration here:
Parameter
Setting
Enable Server
Tick the box when authentication is
Authentica...
made on the server of the Internet
provider
User Name
E-mail account at the provider
Password
Password connected to the e-mail
account
SMTP Server
SMTP server address of the provider
SMTP Port
Enter the SMTP port here
(Default: 25)
Enable SSL
Tick the box to activate the e-mail
encryption
Sender
Name of the sender
93
All manuals and user guides at all-guides.com
Sender´s
Adresse
Sender´s Recei-
ver
Receiver
Receiver´s Ad-
resse
Enable Attached
Picture
Interval
1.
2.
3.
Corresponding e-mail address for
the e-mail account
Select three possible recipients for
the e-mail
Enter the name of the recipient here
Enter the e-mail address of the
recipient here
Tick the box when camera images
should also be sent with the e-mail
as photo files
Select the interval between the
individual recordings (2 to 5 sec-
onds)
Enter the parameters of the e-mail notification.
Click on Test to send a test e-mail.
Please clarify if your settings are correct and you
have received a confirmation mail. Then click on Ap-
ply.
Note
The device sends an e-mail to the specified recipi-
ents.
If the e-mail is not received, check the settings
and correct them.
If necessary, check the spam filter of your e-mail
client.
Note
Please contact your e-mail provider for SMTP ac-
count settings and configuration.
Please note: E-Mail provider may offer SSL only
encryption for SMTP delivery. This DVR has been
successfully tested for SSL compatibility with
following providers: GMX, Web.de, Gmail, T-
Online.