Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Motion
Select the camera channel under "Camera".
Select the checkbox for the motion detecetion and draw a
window with the mouse to setup the active motion area.
In order to make the motion detection work on the whole
camera image you can click on "Full Screen".
Note
In order to record using the motion recognition, you
must set the time plan at recording (see p. 104).
Handling
Trigger Channel
When "Reaction" is clicked, the TAB Trigger channel ap-
pears (only with motion recognition):
Select one or more camera channels that should carry
out a reaction in the event of an alarm.
Confirm the settings by clicking Apply and leave the
menu with OK.
Armin Schedule
Select the TAB Arming Schedule.
All manuals and user guides at all-guides.com
Here you set the times when the reactions in the TAB
Reaction are triggered.
1.
2.
3.
Handling
Click on the TAB Handling.
Here you can configure the behavior of the recorder during
a detected event (for example: motion got detected) by
clicking the respective check box.
Parameter
Full Screen Monitoring
Audible Warning
Send E-Mail
Select the day and enter the schedule.
Select whether the settings should be applied to all
days of the week with using Copy.
Confirm the settings by clicking Apply and leave the
menu with OK.
Note
You can define up to 8 time periods (each from
00:00 to 00:00). The times in the individual peri-
ods must not overlap.
Notification
The camera is displayed as
a full-screen picture in live
cast
The device emits a repeat-
ing tone
An e-mail is sent to a spe-
cific e-mail address.
Confirm the settings by clicking Apply and leave the
menu with OK
Camera
100
Publicité
Table des Matières
