Abus TVHD80120 Notice D'utilisation page 116

Maintenance
TAB Network Detection
In "Destination Address", you can check the connection
to another device, such as a computer ('pinging'). Enter
the network address of the device to be checked (e.g.
192.168.0.25) and press Test.
Information on two parameters appears:
Parameter Setting
Average The time the pinged device needs to
delay reply.
Packet loss Displays the percentage of packets
Rate: that were not transmitted
Note
If the packet loss rate is high, we recommend that
the "Network Test" is repeated.
Note
If the packet loss rate is still high, you should
check that the cables are correct and not dam-
aged.
The higher the packet loss rate, the poorer the
connection between the pinged device and re-
corder.
All manuals and user guides at all-guides.com
For "Network Packet Export", you can export the settings
of the individual connections or – depending on the set-
ting – the connection.
1. For "Device Name", select a storage medium to save
2. Click Export.


TAB Network Stat.
Displays all used in- and outcoming bandwidth.
You can refresh the data by clicking on Refresh.
the settings to.
After the progress display finishes and initializa-
tion is successful, an information window ap-
pears. Close it with OK.
Click Status to display the status of the LAN connec-
tions (connected/not connected).
Click Network to change your network settings (see
p. 91).
116